| Image |
Product Nmne |
Product Modle |
 |
|
Expanded graphite packing (with corrosion inhibitor)
|
|
Corrugated gasket is made of flat metal gasket with machined 90degree corrugated or notched teeth under special process.according to the specific application, the corrugated gasket can be made with inner and/or outer fixed position rings.the composite corrugated gasket with graphite or Teflon sheet is available
|
|
JH-6040
|
|
|
|
 |
|
JH-6050
|
|
|
|
 |
|
Metal Jacketed Gasket
|
Metal Jacketed gasket (MJG) is made from graphite , ceramic,
non-asbestos etc., filler covered with thin metal jacket, such as
stainless steel, carbon steel, copper etc.
|
|
01
|
|
|
|
 |
|
Octagonal type Metal Gasket
|
Machined from solid in a variety of shapes and are designed
for high pressure, high temperature or highly corrosive appli-
cationsby selecting the most suitable material and shapes.
Ring material consists of Carbon steel sheet or SUS 304,316
etc. or as specified sheet.
|
|
JH-8036
|
|
|
|
 |
|
Rubber Sheet
|
Main products
Silicone rubber sheet, Nitrile rubber sheet (NBR), Fluorine rubber
sheet (Viton), others
|
|
JH-8038
|
|
|
|
 |
|
Graphite Packing Ring
|
The cutting pure flexible graphite sheet is wound and molding
pressed into ring-lik packing.
|
|
JH-8036
|
|
|
|
 |
|
Expanded graphite Packing Ring
|
304 steel ribbon, steel net, nickel or platinum is added into the
expanded graphite packing ring and molding pressed into ring-
like packing.
|
|
JH-8038
|
|
|
|
 |
|
JH-7040
|
|
|
|
 |
|
JH-8038
|
|
|
|
 |
|
Kevlar Fiber Packing
|
Kevlar,a high strength organic fiber,is braided into packing and
then dipped into Teflon emulsion and lubricant (silicon oil).
|
|
JH-7010
|
|
|
|
 |
|
Carbonized Fiber Packing
|
The acrylic fiber is carbonized under high temperature, then
dipped into Teflon emulsion and braided into carbonized fiber
packing.
|
|
JH-7020
|
|
|
|
 |
|
JH-7022
|
|
|
|
 |
|
Expanded graphite Packlng
|
Expanded graphite stripe is braided into packing.
Carbon fiber, copper wire, 304,316 and nickel
alloy wire is available as reintorcement.
|
|
JH-7030
|
|
|
|
 |
|
Ramie Fiber Packing
|
Long ramie fiber is dipped into Teflon emulsion (oil) and
braided into packing with lubricant.
|
|
JH-7050
|
|
|
|
 |
|
Graphite Fiberglass Expansion Packing
|
Fiberglass is expanded in a special facility with high pressure
air and mixed with fine graphite powder and rubber resin and
then braided into packing with lubricant.
|
|
JH-7060
|
|
|
|
 |
|
Graphited PTFE & aramid in zebra braided packing
|
Designed for high pressure reciprocating pumps, medium speed
centrifugals and valves. It can be used for general service steam,
gases, solvents, mild acids, alkalis and most abrasive liquids.
The packing will not stain in pulp & papermill, pharmaceutical,
food and sugar industries.
|
|
|
|
|
|
 |
|
Reinforced asbestos sheet
|
The product is made of asbestos Paper & Sheet with 0.20-0.25
mm tinplate reinforced, which is extensively applied in manufactu
ring various gaskets of motor, water pump and air-condition. .
The product has excellent performance in dilatability, sealing equ
ality and long life etc.. Mainly applied in automobile farming mac
hine, motorcycle, engineering, water pump and air-condition etc.,
It is also can be used in high strength gaskets and cylinder
gaskets etc.. Standard Size: 500x1000 mm, 500x1200 mm,
1000 x 1200 mm, 1000 x 1000 mm Thickness: 1.0 TO 2.5 mm
Color: Grey, Black.
|
|
|
|
|
|
 |
|
PTFE tube
|
PTFE tube is obtained with PTFE material through mold-pressing,
sintering and machinery-processing. It is used as insulating cover
for conductor, pipe for corrosive fluids. PTFE tube can resists all
the media with the exception of melted alkaline metals. And it has
high mechanical strength. It can also be used to seal the valve
rod and rotating pump shaft in corrosion-resistant case.
|
|
|
|
|
|
 |
|
PTFE Rod
|
There are two kinds of PTFE rods to offer. One is manufactured
by Paste extruding method in the diameter from 4 to 9 mm and
the other is made by ram extruding method is the diameter from
10to 50mm; rods Over the diameter 50mm are manufactured by
moulding. PTFE is the most chemical-resistant of all known
plastics. It does not age.Applications: Electrical Insulation, seal,
Antisticking materials.
|
|
|
|
|
|
 |
|
PTFE Sheet
|
PTFE molded sheet is manufa ctured by molding method with
PTFE granular resin. PTFE is the most chemical resistance of all
known plastics. It does not age.Applications: Lining Bearing pads,
seals, and electrical insulation.
|
|
|
|
|
|
|
|
PTFE Cut Gasket
|
This products are machined or cut from PTFE rods,pipes and
sheets, such as V type gaskets, plain gaskets, ball valve’s
washer,etc.It has several outstanding characteristics such as
chemical inertness,moisture and weather resistance excellent
dielectric,etc.
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
 |
|
High-efficiency Metal Random Packing
|
Metal random packings are available in various materials of co-
nstructionsuch as: Carbon Steel, Stainless Steel, Titanium and
Zirconium, Copper, Aluminum. Its unique shape ensures low
liquid holdup and lowpressure drop . The external geometry
prevents the packing from interlocking or entangling, ensuring
the randomness and optimum surface area within the packed -
bed , while the internal fingers , arches and vanes promote
optimum interfacial gas / liquid contact with minimal drag or
hold-up. Energy consumption is reduced, due to lower reflux
ratios.
|
|
|
|
|
|
 |
|
Plastic (random) Tower Packing
|
Plastic tower packing is made of those heat resistant and chem-
ical corrosion resistant plastics, including polyethylene (PE),
polypropylene (PP), reinforced polypropylene (RPP), polyvinyl
chloride(PVC), chloridized polyvinyl chloride(CPVC) and polyv-
inylidene fluoride (PVDF).
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
|
|
 |
|
|
|
|
|
 |
|
Metallic standard structured packing (Corrugated Structured Packing)
|
The angle of inclination of the corrugations of adjacent sheets
is reversed with respect to the vertical column axis, forming m-
ixingcells at every point where the corrugations intersect.
Perforations and surface texturing, including waffled, grooved
and smooth , promote intimate mixing and radial distribution
over the entire tower cross-section. Each subsequent element
is rotated 90°about the column axis so that the sheets of one
element are perpendicular to the sheets of the elements above
and below.
|
|
|
|
|
|
